Vaclav Ocelik

2022

Real Structure and Residual Stresses of Ground Laser Cladded H13 Tool Steel

Trojan, K., Čapek, J., Čech, J., Ganev, N., Ocelík, V. & Kolařík, K., 2022, EAN 2021 - 59th International Scientific Conference on Experimental Stress Analysis - Book of Full Papers. Bittnar, P. & Padevet, P. (eds.). Czech Technical University, p. 222-225 4 p. (EAN 2021 - 59th International Scientific Conference on Experimental Stress Analysis - Book of Full Papers).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2018

Correlation between cladding speed, microstructure and hardness of laser-deposited steel coatings: The role of strengthening mechanism

Hemmati, I., Ocelík, V. & De Hosson, J. T. M., 27-Sept-2018, ICALEO 2014 Congress Proceedings. 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Enhanced Piezoelectric Properties in PNZT-ZrO2 Composites at Low Frequencies (Oral presentation)

Acuautla, M., Damerio, S., Ocelik, V. & Noheda, B., 2018, International Ceramic Congress (CIMTEC) 2018.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

High piezoelectric properties in grain –oriented composite PNZT-ZrO2 for energy harvesting (Oral presentation)

Acuautla, M., Damerio, S., Ocelik, V. & Noheda, B., 2018, MRS - Spring meeting 2018.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Microstructural characterization of surface damage through ultra-short laser pulses

Ocelík, V., Oboňa, J. V., Skolski, J. Z. P., Römer, G.-W. R. B. E., Veld, A. J. H. I. T. & De Hosson, J. T. M., 27-Sept-2018, ICALEO 2014 Congress Proceedings. 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

2017

Crack propagation in metallic glass ribbon as a function of the position of stress concentrators

Huráková, M., Csach, K., Miškuf, J., Juríková, A., Ocelík, V. & De Hosson, J. T. M., 2017, Metallography XVI. TRANS TECH PUBLICATIONS LTD, Vol. 891 MSF. p. 494-499 6 p. (Materials Science Forum; vol. 891 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

62 Downloads (Pure)

Dynamics of tempering processes in stainless steel

De Jeer, L. T. H., Ocelík, V. & De Hosson, J. T. M., 2017, WIT Transactions on Engineering Sciences. WIT Press, Vol. 116. p. 187-193 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

2 Citations (Scopus)

266 Downloads (Pure)

Effects of advanced laser processing on the microstructure and residual stresses of H13 tool steel

Trojan, K., Ocelík, V., Ganev, N., Němeček, S. & Čapek, J., 2017, EAN 2017 - 55th Conference on Experimental Stress Analysis 2017. Technical University of Kosice, p. 464-471 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

1 Citation (Scopus)

126 Downloads (Pure)

Microstructure transformation of Αlpha-titanium after mechanical and laser forming

Fidder, H., Ocelik, V. & De Hosson, J. T. M., 2017, WIT Transactions on Engineering Sciences. WIT Press, Vol. 116. p. 215-222 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

268 Downloads (Pure)

Nonmetallic inclusion bonding in bearing steel and the initiation of white-etching cracks

Vegter, E., Krock, H., Kadin, Y. & Ocelik, V., 1-Jan-2017, Bearing Steel Technologies: 11th Volume, Progress in Steel Technologies and Bearing Steel Quality Assurane. ASTM International, Vol. STP 1600. p. 519-532 14 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

7 Citations (Scopus)

Shear band morphology of indented region in Cu-based metallic glass

Csach, K., Huráková, M., Juríková, A., Miškuf, J., Ocelík, V. & De Hosson, J. T. M., 2017, Metallography XVI. TRANS TECH PUBLICATIONS LTD, p. 500-503 4 p. (Materials Science Forum; vol. 891 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

36 Downloads (Pure)

Surface degradation of nanocrystalline zirconia dental implants

Ocelík, V., Schepke, U., Rasoul, H. H., Cune, M. S. & De Hosson, J. T. M., 2017, WIT Transactions on Engineering Sciences. WIT Press, Vol. 116. p. 355-365 11 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

1 Citation (Scopus)

276 Downloads (Pure)

2014

Laser-induced periodic surface structures, modeling, experiments, and applications

Römer, G. R. B. E., Skolski, J. Z. P., Oboňa, J. V., Ocelík, V., De Hosson, J. T. M. & Huis In't Veld, A. J., 2014, Proceedings Volume 8968, Laser-based Micro- and Nanoprocessing VIII: The International Society for Optical Engineering. SPIE, Vol. 89680D. 89680D

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

7 Citations (Scopus)

2013

Statistical analysis of SEM image noise

Mansilla, C., Ocelík, V. & De Hosson, J. T. M., 2013, WIT Transactions on Engineering Sciences. Vol. 78. p. 13-24 12 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

4 Citations (Scopus)

Thickness and waviness of surface coatings formed by overlap: Modelling and experiment

Ocelík, V., Nenadl, O., Hemmati, I. & De Hosson, J. T. M., 2013, WIT Transactions on Engineering Sciences. WIT Press, Vol. 78. p. 135-144 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

1 Citation (Scopus)

2012

Characterization of protective layers produced by laser treatment

Ocelík, V., Hemmati, I. & De Hosson, J. T. M., 2012, ICALEO 2012 - 31st International Congress on Applications of Lasers and Electro-Optics. p. 608-617 10 p. ICA12_1806

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2011

Evaluation of residual stresses in laser clad coating at the micrometer scale

Furár, I., Ocelík, V. & De Hosson, J. T. M., 2011, WIT Transactions on Engineering Sciences. WIT Press, Vol. 71. p. 277-286 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

1 Citation (Scopus)

22 Downloads (Pure)

Evolution of microstructure and properties in laser cladding of a Ni-Cr-B-Si hardfacing alloy

Hemmati, I., Ocelík, V. & De Hosson, J. T. M., 2011, WIT Transactions on Engineering Sciences. Vol. 71. p. 287-296 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

14 Citations (Scopus)

47 Downloads (Pure)

Experimental approach to eliminate Start/Stop defects in laser cladding

Ocelík, V., Eekma, M., Hemmati, I., Dutka, M. & De Hosson, J. T. M., 2011, WIT Transactions on Engineering Sciences. Vol. 71. p. 245-254 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Surface melting of copper by ultrashort laser pulses

Oboňa, J. V., Ocelík, V., De Hosson, J. T. M., Skolski, J. Z. P., Mitko, V. S., Römer, G. R. B. E. & Huis in 't Veld, A. J., 2011, WIT Transactions on Engineering Sciences. WIT Press, Vol. 71. p. 171-179 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

1 Citation (Scopus)

25 Downloads (Pure)

2010

EVOLUTION OF MICROSTRUCTURE IN LASER CLAD COATINGS STUDIED BY ORIENTATION IMAGING MICROSCOPY

Ocelik, V., Furar, I. & De Hosson, J. T. M., 2010, TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY. WARRENDALE: The Minerals, Metals & Materials Society, p. 601-608 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2009

Creep of FINEMET alloy at amorphous to nanocrystalline transition

Csach, K., Miškuf, J., Juríková, A. & Ocelík, V., 2009, Key Engineering Materials. TRANS TECH PUBLICATIONS LTD, Vol. 409. p. 373-376 4 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Metallic laser clad coatings: On the pirocessing-microstructure-property relationships

Ocelik, V., de Oliveira, U. & De Hosson, J. T. M., 2009, SURFACE EFFECTS AND CONTACT MECHANICS IX. DeHosson, J. & Brebbia, C. (eds.). SOUTHAMPTON: WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, p. 39-50 12 p. (WIT Transactions on Engineering Sciences).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

2 Citations (Scopus)

99 Downloads (Pure)

2008

Differential scanning calorimetry of Ni-Si-B amorphous alloy after plastic deformation

Juríková, A., Csach, K., Miskuf, J. & Ocelík, V., 2008, 16th Conference of Czech and Slovak Physicists, Proceedings. MAFY Hradec Kralove, p. 175-179 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2007

Laser cladding of Al-Si/SiC composite coatings: Microstructure and abrasive wear behavior

Anandkumar, R., Almeida, A., Vilar, R., Ocelik, V. & De Hosson, J. T. M., 2007, 26th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2007.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

1 Citation (Scopus)

Microstrain Determination in Individual Grains of Laser Deposited Cladding Layers

de Oliveira, U. O. B., Ocelik, V. & De Hosson, J. T. M., 2007, THERMEC 2006 SUPPLEMENT. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). STAFA-ZURICH: TRANS TECH PUBLICATIONS LTD, p. 153-158 6 p. (Advanced Materials Research; vol. 15-17).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Citation (Scopus)

Microstructural and tribological observations in metallic glass forming alloy layers produced by high-power lasers

Matthews, D. T. A., Ocelik, V. & De Hosson, J. T. M., 2007, Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII. De Hosson, J. T. M., Brebbia, C. A. & Nishida, S. I. (eds.). Southampton: WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, p. 33-42 10 p. (WIT TRANSACTIONS ON ENGINEERING SCIENCES; vol. 55).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

26 Downloads (Pure)

Microstructure and abrasive wear studies of laser clad Al-Si/SiC composite coatings

Anandkumar, R., Colaco, R., Ocelik, V., De Hosson, J. T. M. & Vilar, R., 2007, MATERIALS SCIENCE, TESTING AND INFORMATICS III. Gyulai, J. & Szabo, P. (eds.). STAFA-ZURICH: TRANS TECH PUBLICATIONS LTD, p. 89-95 7 p. (Materials Science Forum; vol. 537-538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Thick tool steel coatings with laser cladding

Ocelik, V., de Oliveira, U. & De Hosson, J. T. M., 2007, Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII. DeHosson, J., Brebbia, C. & Nishida, S. (eds.). SOUTHAMPTON: WIT PRESS/COMPUTATIONAL MECHANICS PUBLICATIONS, p. 13-22 10 p. (WIT TRANSACTIONS ON ENGINEERING SCIENCES; vol. 55).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Open Access

File

7 Citations (Scopus)

41 Downloads (Pure)

2006

Thick Co base coatings by Nd:YAG laser cladding: process and residual strain analysis

Oliveira, U., Ocelik, V. & de Hosson, J. T. M., 2006, Host Publication. ASM Press, p. 295 - 300

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Wear properties of metal matrix composite layers prepared by high power laser on TiAIV substrate

Matthews, D., Ocelik, V. & de Hosson, J. T. M., 2006, Host Publication. ASM Press, p. 381 - 398

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

1 Citation (Scopus)

2005

Fundamental mechanical and microstructural observations in metallic glass coating production

Matthews, D. T. A., Ocelik, V. & de Hosson, J. T. M., 2005, Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII. DeHosson, J., Brebbia, C. & Nishida, S. (eds.). Southampton, UK: WIT Press, Vol. VII. p. 161-171 11 p. (WIT TRANSACTIONS ON ENGINEERING SCIENCES; vol. 49).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Laser surface treatment of grey cast iron for automotive applications

Ocelik, V., Tang, P. N., de Boer, M. C., de Oliveira, U. & de Hosson, J. T. M., 2005, Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII. DeHosson, J., Brebbia, C. & Nishida, S. (eds.). Southampton, UK: WIT Press, Vol. VII. p. 221-230 10 p. (WIT TRANSACTIONS ON ENGINEERING SCIENCES; vol. 49).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Residual stresses in Co-based laser claddings investigated by lab X-rays and synchroton diffraction techniques

de Oliveira, U., Ocelik, V. & de Hosson, J. T. M., 2005, Host Publication. Southampton, UK: WIT Press, Vol. VII. p. 241 - 250

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Thick coatings by coaxial laser cladding

Ocelik, V., Oliveira, U., Pieren, A. H. & de Hosson, J. T. M., 2005, Host Publication. Society for Advancement of Heat Treatment and Surface Engineering, p. 191 - 198

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

2004

Functionally Graded Materials Produced with High Power Lasers

De Hosson, J. T. M., Galvan, D., Ocelik, V., Pei, Y. T., Kooi, B. J. & Ramous, E., 2004, Proceedings from International Conference on Advances in Surface Treatment: Research and Applications. Sudarshan, T. S., Sundarajan, G., Totten, G. E. & Joshi, S. V. (eds.). Hyderabad: Society for Advancement of Heat Treatment and Surface Engineering, p. 368-376 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

4 Citations (Scopus)

Side laser cladding deposition and residual stress in a Co-based layer on steel

De Oliveira, U., Ocelík, V. & De Hosson, J. T. M., 2004, Surface Engineering: Proceedings of the 3rd International Surface Engineering Conference. p. 326-330 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

2003

Coatings with laser melt injection of ceramic particles

de Hosson, J. T. M., Ocelik, V. & de Oliveira, U., 2003, SURFACE ENGINEERING: IN MATERIALS SCIENCE II. Seal, S., Dahotre, N., Moore, J., Suryanarayana, C. & Agarwal, A. (eds.). WARRENDALE: The Minerals, Metals & Materials Society, p. 197-207 11 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

1 Citation (Scopus)

Functionally graded materials produced with high power lasers

De Hosson, J. T. M. & Ocelik, V., 2003, THERMEC'2003, PTS 1-5. Chandra, T., Torralba, J. & Sakai, T. (eds.). ZURICH-UETIKON: TRANS TECH PUBLICATIONS LTD, p. 123-130 8 p. (MATERIALS SCIENCE FORUM; vol. 426-432).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

12 Citations (Scopus)

Interfacial adhesion of laser clad functionally graded materials

Ocelik, V., Pei, Y. T. & de Hosson, J. T. M., 2003, SURFACE ENGINEERING: COATING AND HEAT TREATMENTS, PROCEEDINGS. Popoola, O., Dahotre, N., Midea, S. & Kopech, H. (eds.). Columbus, OH, USA: ASM Press, p. 216-225 10 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2 Citations (Scopus)

Laser melt injection of hard ceramic particles into Al and Ti alloys - processing, microstructure and mechanical behaviour

Ocelik, V., Nijman, S., van Ingen, R., Oliveira, U. & de Hosson, J. T. M., 2003, Host Publication. Brebbia, C., DeHosson, J. & Nishida, S. (eds.). Boston: WIT Press, p. 141-153 13 p. (COMPUTATIONAL AND EXPERIMENTAL METHODS; vol. 7).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

Microstructure and properties of TiB/Ti6Al4V coatings produced with laser treatments

Galvan, D., Ocelik, V., Pei, Y., Kooi, B. J. & de Hosson, J. T. M., 2003, Heat treating and surface engineering : 22nd Heat Treating Society Conference and 2nd International Surface Engineering Congress. Indianapolis: ASM Press, p. 411-418 8 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

2002

Processing, microstructure and properties of titanium based alloys strengthened with laser melt injected particles

de Hosson, J. T. M., Ocelik, V. & Vreeling, J. A., 2002, Host Publication. Osaka: High Temperature Society Japan, p. 1 - 14

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Processing and microstructure of laser melt injected WC in a Ti-Al-V matrix

Ocelik, V., Vreeling, J. A. & de Hosson, J. T. M., 2002, Host Publication. Las Vegas, p. 1 - 8

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

Processing and microstructure of laser melt injected WCp in a Ti-6Al-4V matrix

Ocelik, V., Vreeling, A. & De Hosson, J. T., 2002, SAE International Off-Highway Congress - Co-located with CONEXPO-CON/AGG.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic › peer-review

2001

Failure of WCp/Ti-6Al-4V layer prepared by laser melt injection, surface heat treatments

Ocelik, V., Vreeling, J. A. & de Hosson, J. T. M., 2001, Host Publication. Southampton: WIT Press, p. 151 - 161

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Academic

10 Citations (Scopus)

4 Citations (Scopus)

Vaclav Ocelik

Research output

Search results