Abstract
Background: With new inhalation products, lack of knowledge of how much drug is deposited at the site of action in the lungs plus variation in performance of inhalation devices can lead to inaccurate conclusions about drug efficacy. Aim: To compare the consistency of delivered dose (DD) and fine particle dose (FPD) from four inhalation devices. Methods: This in vitro study compared inhalers used for delivery of: aclidinium 400 μg (Genuair®); tiotropium 18 and 2.5 μg (HandiHaler®, Respimat®); and indacaterol 150 μg (Breezhaler®) at three different inhalation flow rates. Measurements included airflow resistance, consistency of DD, FPD and dose emission times. Results: Airflow resistance was highest with HandiHaler, medium with Genuair and lowest with Respimat and Breezhaler. Flow rates corresponding to a 4 kPa pressure drop across the dry powder inhalers were: 38.8 L/min, HandiHaler; 64.5 L/min, Genuair; and 105.3 L/min Breezhaler. Generally, mean DDs were independent of flow rate and consistent over labelled contents. FP mass fractions of 1-3 μm and 3-6 μm differed among devices. Genuair delivered the finest particles within the FPD
Original language | English |
---|---|
Journal | European Respiratory Journal |
Volume | 42 |
Publication status | Published - 1-Sept-2013 |
Keywords
- Airway management
- COPD - management
- aclidinium bromide
- new drug
- indacaterol
- tiotropium bromide
- dapsone
- respiration control
- in vitro study
- dry powder inhaler
- European
- society
- flow rate
- soft mist inhaler
- inhaler
- inhalation
- airflow
- devices
- lung
- drug efficacy