Leveraging 3D printing to enhance mass spectrometry: A review

M. Grajewski, M. Hermann, R. D. Oleschuk, E. Verpoorte, G. Ij. Salentijn*

*Corresponding author for this work

Research output: Contribution to journalReview articlepeer-review

11 Citations (Scopus)
204 Downloads (Pure)

Abstract

The use of 3D printing in the chemical and analytical sciences has gained a lot of momentum in recent years. Some of the earliest publications detailed 3D-printed interfaces for mass spectrometry, which is an evolving family of powerful detection techniques. Since then, the application of 3D printing for enhancing mass spectrometry has significantly diversified, with important reasons for its application including flexible integration of different parts or devices, fast customization of setups, additional functionality, portability, cost-effectiveness, and user-friendliness. Moreover, computer-aided design (CAD) and 3D printing enables the rapid and wide distribution of scientific and engineering knowledge. 3D printers allow fast prototyping with constantly increasing resolution in a broad range of materials using different fabrication principles. Moreover, 3D printing has proven its value in the development of novel technologies for multiple analytical applications such as online and offline sample preparation, ionization, ion transport, and developing interfaces for the mass spectrometer. Additionally, 3D-printed devices are often used for the protection of more fragile elements of a sample preparation system in a customized fashion, and allow the embedding of external components into an integrated system for mass spectrometric analysis. This review comprehensively addresses these developments, since their introduction in 2013. Moreover, the challenges and choices with respect to the selection of the most appropriate printing process in combination with an appropriate material for a mass spectrometric application are addressed; special attention is paid to chemical compatibility, ease of production, and cost. In this review, we critically discuss these developments and assess their impact on mass spectrometry.

(c) 2021 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Original languageEnglish
Article number338332
Number of pages17
JournalAnalytica Chimica Acta
Volume1166
DOIs
Publication statusPublished - 29-Jun-2021

Keywords

  • Rapid prototyping
  • Stereolithography
  • Fused-deposition modelling
  • Ambient ionization
  • Ion transport
  • Sample preparation
  • CONTACTLESS CONDUCTIVITY DETECTION
  • SPRAY IONIZATION CARTRIDGE
  • CAPILLARY-ELECTROPHORESIS
  • MS ANALYSIS
  • BIOCOMPATIBILITY
  • SEPARATION
  • MINIATURE
  • PRINTERS
  • TOXICITY
  • DEVICES

Cite this