A discrete dislocation–transformation model for austenitic single crystals

J. Shi*, S. Turteltaub, E. Van der Giessen, J. J. C. Remmers

*Bijbehorende auteur voor dit werk

OnderzoeksoutputAcademicpeer review

8 Citaten (Scopus)

Samenvatting

A discrete model for analyzing the interaction between plastic flow and martensitic phase transformations is developed. The model is intended for simulating the microstructure evolution in a single crystal of austenite that transforms non-homogeneously into martensite. The plastic flow in the untransformed austenite is simulated using a plane-strain discrete dislocation model. The phase transformation is modeled via the nucleation and growth of discrete martensitic regions embedded in the austenitic single crystal. At each instant during loading, the coupled elasto-plasto-transformation problem is solved using the superposition of analytical solutions for the discrete dislocations and discrete transformation regions embedded in an infinite homogeneous medium and the numerical solution of a complementary problem used to enforce the actual boundary conditions and the heterogeneities in the medium. In order to describe the nucleation and growth of martensitic regions, a nucleation criterion and a kinetic law suitable for discrete regions are specified. The constitutive rules used in discrete dislocation simulations are supplemented with additional evolution rules to account for the phase transformation. To illustrate the basic features of the model, simulations of specimens under plane-strain uniaxial extension and contraction are analyzed. The simulations indicate that plastic flow reduces the average stress at which transformation begins, but it also reduces the transformation rate when compared with benchmark simulations without plasticity. Furthermore, due to local stress fluctuations caused by dislocations, martensitic systems can be activated even though transformation would not appear to be favorable based on the average stress. Conversely, the simulations indicate that the plastic hardening behavior is influenced by the reduction in the effective austenitic grain size due to the evolution of transformation. During cyclic simulations, the coupled plasticity-transformation model predicts plastic deformations during unloading, with a significant increase in dislocation density. This information is relevant for the development of meso- and macroscopic elasto-plasto-transformation models.

Originele taal-2English
Artikelnummer055005
Aantal pagina's26
TijdschriftModelling and Simulation in Materials Science and Engineering
Volume16
Nummer van het tijdschrift5
DOI's
StatusPublished - jul.-2008

Citeer dit