Dry frictional contact of metal asperities: A dislocation dynamics analysis

Fengwei Sun, Erik van der Giessen, Lucia Nicola*

*Bijbehorende auteur voor dit werk

OnderzoeksoutputAcademicpeer review

18 Citaten (Scopus)
2 Downloads (Pure)


Discrete dislocation plasticity simulations are performed to investigate the static frictional behavior of a metal asperity on a large single crystal, in contact with a rigid platen. The focus of this study is on understanding the relative importance of contact slip opposed to plasticity in a single asperity at the micrometer size scale, where plasticity is size dependent.

Slip of a contact point is taken to occur when the shear traction exceeds the normal traction at that point times a microscopic friction coefficient. Plasticity initiates through the nucleation of dislocations from Frank-Read sources in the metal and is modeled as the collective motion of edge dislocations.

Results show that plasticity can delay or even suppress full slip of the contact. This generally happens when the friction coefficient is large. However, if the flattening depth is sufficiently large to induce nucleation of a large dislocation density, slip is suppressed even when the friction coefficient is very small. This study also shows that when self-similar asperities of different size are flattened to the same depth and subsequently loaded tangentially, their frictional behavior appears size independent. However, when they are submitted to the same contact pressure, smaller asperities slip while larger asperities deform plastically. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Originele taal-2English
Pagina's (van-tot)162-169
Aantal pagina's8
TijdschriftActa Materialia
StatusPublished - 1-mei-2016

Citeer dit