Efficient Mild Organosolv Lignin Extraction in a Flow-Through Setup Yielding Lignin with High beta-O-4 Content

Douwe S. Zijlstra, Coen A. Analbers, Joren de Korte, Erwin Wilbers, Peter J. Deuss*

*Bijbehorende auteur voor dit werk

OnderzoeksoutputAcademicpeer review

25 Citaten (Scopus)
149 Downloads (Pure)

Samenvatting

Current lignin fractionation methods use harsh conditions that alter the native lignin structure, resulting in a recalcitrant material which is undesired for downstream processing. Milder fractionation processes allow for the isolation of lignins that are high in beta-aryl ether (beta-O-4) content, however, at reduced extraction efficiency. The development of improved lignin extraction methods using mild conditions is therefore desired. For this reason, a flow-through setup for mild ethanosolv extraction (120 degrees C) was developed. The influence of acid concentration, ethanol/water ratio, and the use of other linear alcohol co-solvents on the delignification efficiency and the beta-O-4 content were evaluated. With walnut shells as model feedstock, extraction efficiencies of over 55% were achieved, yielding lignin with a good structural quality in terms of beta-O-4 linking motifs (typically over 60 per 100 aromatic units). For example, lignin containing 66 beta-O-4 linking motifs was obtained with an 80:20 n-propanol/water ratio, 0.18 M H2SO4 with overall a good extraction efficiency of 57% after 5 h. The majority of the lignin was extracted in the first 2 hours and this lignin showed the best structural quality. Compared to batch extractions, both higher lignin extraction efficiency and higher beta-O-4 content were obtained using the flow setup.

Originele taal-2English
Artikelnummer1913
Aantal pagina's17
TijdschriftPolymers
Volume11
Nummer van het tijdschrift12
DOI's
StatusPublished - dec.-2019

Citeer dit