In this work we concentrate on the in situ dynamics of interphase boundary motion during transformations. Insitu high temperature electron-back scatter diffraction (HT EBSD) was employed to study the ferrite-austenite-ferrite transformation in low carbon steel. A novel method was designed to derive the velocity of the interphase boundaries from the EBSD phase maps. It is concluded that the motion of the transformation front occurs in a jerky-type motion, i.e. not continuous in time on a microscale, as the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation would predict on themacro-scale. It is shown that HT EBSD is capable of providing relevant supplementary insight in the ferrite-austenite phase transformations with adequate spatiotemporal resolution, which would remain hidden in volume averaging experimental techniques such as X-Ray diffraction. In particular, ferrite-austenite phase boundary velocities between 1.4 +/- 0.3 and 4.0 +/- 0.2 nm/s were detected during isochronal heating with 0.5 degrees C/min. The mean interphase boundary velocity was ranging between 5.0 +/- 0.2 and 6.4 +/- 0.2 nm/s for austenite-ferrite transformation with a cooling rate of 1 degrees C/min. Ledge growth at isothermal conditions, resulted in velocity of 23 nm/s along phase boundary. A strong dependency of interphase boundary mobility and parent-daughter phase boundary misorientation angles was not found. (C) 2017 Elsevier Ltd. All rights reserved.